Applications

The following pages show a small selection of the many and varied metal spraying applications. You can filter the applications on the left hand side or search for keywords that may relate to your application, e.g. LPG or Steel. Further applications can be seen in the Blog and Press section as well as the Video section.

application Thermal Barrier Coating Onto Exhausts Systems

INTRODUCTION: Thermal Barrier Coating (TBCs) are ceramic materials which are widely used on modern aero engines and land based turbines. They can also be applied to vehicle exhausts, turbocharger casings, heat shields and other vehicle components to reduce heat transfer and improve vehicle performance. Heat soak from hot exhaust systems transfers into other vehicle components […]

View in Full ›
application Metallisation Equipment Protecting Fishing Boats

Metallisation’s thermal spraying equipment has been protecting a diverse range of surfaces, structures and vessels for over ninety years and continues to be the chosen solution for many industry sectors. A recent project has yet again proven the longevity of thermal sprayed surfaces. Parkol Marine Engineering, based in Whitby, has recently applied a thermal sprayed […]

Coating: Arc sprayed zinc
View in Full ›
application Metallisation Arcbeam spray concentrator.

Metallisation equipment is used around the globe on a daily basis to protect various structures and substrates from corrosion. One recent project saw the Metallisation Arcbeam spray concentrator used successfully at a Middle Eastern oil refinery. Metallisation’s customer, Anti Corrosion Protective Systems (APS), based in Dubai, has been using Metallisation Arcspray equipment for over twenty […]

View in Full ›
application HVOF Engineering Applications

High Velocity Oxygen Fuel (HVOF) coatings HVOF is a high energy thermal spray process which produces dense, strong coatings of cermets and metals which give excellent performance in demanding, aggressive, wear and corrosive environments. HVOF coatings are an important part of advanced surface engineering which enable us to salvage and improve components. This enables machinery […]

Coating: High Velocity Oxygen Fuelled spray coatings.
View in Full ›
application Laser Cladding for Critical Component Repair – Duplex Stainless Steel

Introduction     Laser cladding, a process that falls into the range of hard-facing solutions, can be used to increase corrosion resistance, wear resistance or impact performance of metallic components, using a method of applying a fully dense, metallurgically bonded and virtually pure coating.   Laser cladding can be used across a diverse range of […]

Coating: Dense, metallurgically bonded and virtually pure coating.
View in Full ›
Metallisation Launches New Laser Cladding System
application Metallisation Launches New Laser Cladding System

Metallisation has launched a new laser cladding system, MET-CLAD, which has further enhanced Metallisation’s diverse range of surface coating equipment. Laser cladding, a process that falls into the range of hard- facing solutions, can be used to increase corrosion resistance, wear resistance or impact performance of metallic components, using a method of applying a fully […]

Coating: The laser cladding process utilises a precisely focused high power laser beam to create a tightly controlled weld pool into which a metallic powder is applied.
View in Full ›
application Protecting Ships and Trawlers from Corrosion

Metal or thermal spraying is a technology, which protects or extends the life of a wide variety of structures in the most hostile environments and in situations where coatings are vital for safety and performance. Thermal spraying is carried out in a wide range of anti- corrosion or engineering markets. Typical applications include the spraying […]

Coating: Thermal spraying for corrosion protection
View in Full ›
application Metallisation Equipment uses TSA Coatings to Protect Footbridges

Solent Protective Coatings Limited (SPC) recently purchased additional metal spraying equipment from Metallisation in order to fulfil another contract win. SPC has been a customer of Metallisation for around two years and is a huge fan of metal spraying. The company purchased a new MK73 Flamespray system and arranged additional training for its operators to […]

Coating: Aluminium (TSA)
View in Full ›
application Gemini Expands Metal Spraying Services, using TSA Coatings With Metallisation Equipment

Gemini Corrosion Services Ltd is a world leader in protecting steel structures, pipework and subsea pipelines against corrosion. Gemini, a long term customer of Metallisation, is committed to the Metallisation ARC528E system for the effective and efficient application of protective coatings. Gemini, based in the north east of Scotland, has been providing high quality, cost […]

Coating: Aluminium (TSA)
View in Full ›
application Iris NV Expands Use of TSA Coatings and Metal Spraying for Refinery Vessel

Metallisation customer, Iris NV, based in Belgium, has expanded its use of metal spraying and purchased additional Metallisation equipment to accommodate this expansion. Iris was founded in 1946 as an industrial painting company specialising in the treatment of gas pipes, electrical stations, high tension networks and power pylons. Iris NV The services offered by Iris […]

Coating: Aluminium (TSA)
View in Full ›