Applications

The following pages show a small selection of the many and varied metal spraying applications. You can filter the applications on the left hand side or search for keywords that may relate to your application, e.g. LPG or Steel. Further applications can be seen in the Blog and Press section as well as the Video section.

application Working Metals Expands Its Metal Spraying With Metallisation Equipment

Working Metals Limited, specialist architectural metalwork fabricators, has expanded its metal spraying services with the purchase of Metallisation equipment. Working Metals Limited Working Metals, based in Uckfield, East Sussex, provides bespoke commissioned contract work to individuals and businesses. The company has now added bronze and copper metal spraying to its services and is amazed with […]

Coating: Bronze
View in Full ›
application Metallisation Protecting Film Industry Sets

For the first time in its 87 year history, Metallisation equipment has been used to protect film industry sets from damage during filming. The polystyrene props were first cut to shape and then metal sprayed with zinc and steel to strengthen them and make them less prone to dents during movement around the set. Metallisation […]

Coating: Zinc base layer, copper, bronze, steel etc. top coatings
View in Full ›
application HVOF Alternatives to Hard Chrome Plating

Introduction to HVOF Alternatives to Hard Chrome Plating Chrome plating has been accepted and used for many years to provide hard wearing surfaces, however; American environmental legislation as forced the closure of many, many US plating contractors. To continue legal operations, those US contractors that have wished to remain in business have had to make […]

Coating: 99408 Fe/Cr/Mo, 99325 Ni/Cr/Bi/Si, 99735 Wc/Co17%, 99745 Wc/Co/Cr
View in Full ›
application Comparison of metal spraying with painting

Painting is a widely used method of protecting steelwork (and other materials) from corrosion. Most paints are organic (polymer) bases with added metal particles, corrosion inhibiting compounds or inert filler materials. They may be applied by dipping, brushing or spraying to suitably prepared (grit blasted) surfaces. Protective paint systems are multi-layer comprising a priming coat, […]

Coating: N/a
View in Full ›
application Comparison of metal spraying with electro plating

The most common method is deposition from aqueous solutions, many of which are toxic. During electro plating, water decomposes and hydrogen is deposited at the surface being plated. This will cause embrittlement of high strength steels unless they are heat treated immediately after plating. This is only partially effective in reversing the damage. Electro deposition […]

Coating: N/a
View in Full ›
application Comparison of metal spraying with galvanising

Galvanising is a well established process for applying a corrosion protection layer of zinc to steel. Treated steelwork is immersed briefly in molten zinc and the coating builds up very quickly. Galvanised layers are usually of even thickness, dense and metallurgically bonded to the steel. Thickness is typically 0.002 – 0.006 in (50 – 150μ). […]

Coating: N/a
View in Full ›
application Comparison of metal spraying with welding

Welding is a method of joining materials or components to each other, either by direct fusion or through the use of an intermediate filter material. It is also used to apply surface coatings for reclamation or to confer improved wear resistance on OEM articles. Weld overlay materials are typically steels, bronzes or nickel based alloys. […]

Coating: N/a
View in Full ›