Applications

The following pages show a small selection of the many and varied metal spraying applications. You can filter the applications on the left hand side or search for keywords that may relate to your application, e.g. LPG or Steel. Further applications can be seen in the Blog and Press section as well as the Video section.

application Earthing of resin insulators using arcspray

INTRODUCTION The high voltage resin insulators required when using switchgear between 3.2 KV and 38KV can sometimes give rise to problems of air ionisation between metal components and the resin insulators. This ionisation is due to the corona or electrical discharge appearing around the surface of the charged conductor being insulated. It is possible to […]

Coating: Arcspray 02E (Zn)
View in Full ›
application Earthing of resin insulators using the flamespray process

INTRODUCTION    The high voltage resin insulators required when using switchgear between 3.2 KV and 38KV can sometimes give rise to problems of air ionisation between metal components and the resin insulators. This ionisation is due to the corona or electrical discharge appearing around the surface of the charged conductor being insulated. It is possible […]

Coating: Flamespray 02E (Zn)
View in Full ›
application Metal spraying of capacitor ends

  Introduction The most common type of capacitor in use today is the foil-wound type. A thin film of metal, 1µm, is deposited on one side of a thin, 2.5 – 14µm, polymer film di-electric leaving one edge uncoated. The film is wound around a central insulating core to form a ‘swiss roll’ with the […]

Coating: Arcspray 02E (Zn) or 09E (Sn/Zn)
View in Full ›
application Electrical switch boxes
Coating: Zinc - Flame or Arc
View in Full ›