Applications

The following pages show a small selection of the many and varied metal spraying applications. You can filter the applications on the left hand side or search for keywords that may relate to your application, e.g. LPG or Steel. Further applications can be seen in the Blog and Press section as well as the Video section.

45 Result(s) found
Metallisation Arcbeam spray concentrator.

Metallisation equipment is used around the globe on a daily basis to protect various structures and substrates from corrosion. One recent project saw the Metallisation Arcbeam spray concentrator used successfully at a Middle Eastern oil refinery. Metallisation’s customer, Anti Corrosion Protective Systems (APS), based in Dubai, has been using Metallisation Arcspray equipment for over twenty […]

View in Full ›
HVOF Engineering Applications

High Velocity Oxygen Fuel (HVOF) coatings HVOF is a high energy thermal spray process which produces dense, strong coatings of cermets and metals which give excellent performance in demanding, aggressive, wear and corrosive environments. HVOF coatings are an important part of advanced surface engineering which enable us to salvage and improve components. This enables machinery […]

Coating: High Velocity Oxygen Fuelled spray coatings.
View in Full ›
Laser Cladding for Critical Component Repair – Duplex Stainless Steel

Introduction     Laser cladding, a process that falls into the range of hard-facing solutions, can be used to increase corrosion resistance, wear resistance or impact performance of metallic components, using a method of applying a fully dense, metallurgically bonded and virtually pure coating.   Laser cladding can be used across a diverse range of […]

Coating: Dense, metallurgically bonded and virtually pure coating.
View in Full ›
Laser Cladding for Materials Processing Hammers

Introduction Materials processing hammers are used in industry to pulverise hard and abrasive materials into a fine powder. The hammers are made from manganese steel, which although hard wearing, is prone to impact wear and tear. Laser cladding the impact areas of the hammers is a cost effective method of applying a nickel based material […]

Coating: Nickel based alloy.
View in Full ›
Metallisation Launches New HVOF System

This is the latest development in its range of liquid or gas fuelled High Velocity Oxygen Fuel (HVOF) systems. The new Met-PCC HVOF system retains all of the simple control and operator interface features of the previous HVOF system and is available in two versions: The Met-PCC HVOF-L (liquid fuel), and the Met-PCC HVOF-G (gas […]

Coating: HVOF
View in Full ›
Laser Cladding for Continuous Caster Rolls

Laser Cladding for Continuous Caster Rolls   Continuous caster rolls are used in the steel industry to cast continuous solid forms from liquid steel. The rolls are exposed to thermal fatigue, high temperatures, bending stresses, corrosion oxidation and abrasion. The standard method of protecting caster rolls is by submerged arc welding with a 400 series […]

View in Full ›
Metallisation Launches New Laser Cladding System
Metallisation Launches New Laser Cladding System

Metallisation has launched a new laser cladding system, MET-CLAD, which has further enhanced Metallisation’s diverse range of surface coating equipment. Laser cladding, a process that falls into the range of hard- facing solutions, can be used to increase corrosion resistance, wear resistance or impact performance of metallic components, using a method of applying a fully […]

Coating: The laser cladding process utilises a precisely focused high power laser beam to create a tightly controlled weld pool into which a metallic powder is applied.
View in Full ›
Introduction to Thermal Spray and Engineering Applications

What is Thermal Spraying?   Thermal spraying is a technology which improves or restores the surface of a solid material. The process can be used to apply coatings to a wide range of materials and components, to provide resistance to: Wear, erosion, cavitation, corrosion, abrasion or heat. Thermal spraying is also used to provide electrical […]

Coating: Various steel and ceramic coating materials
View in Full ›
Automated Metal Spraying at Laguna Verde Nuclear Power Plant Veracruz, Mexico

Metallisation customer, Lainsa, based in Mexico and part of Grupo Dominguis, provides metal spraying for corrosion protection of pipes used to exchange and transport dry water vapour in thermoelectric, conventional and nuclear power plants. Metal Spraying for Corrosion Protection of Pipes The application of metal spraying is critical, as the circulation of dry steam at […]

Coating: Stainless and Nickel Steels
View in Full ›
Woof Develops Plasma Ceramic Coatings Range

Metallisation customer, Woof Thermal Management Technology, has applied well proven plasma ceramic coatings technology to high performance automotive applications, to provide highly effective thermal barriers in extreme conditions. Metallisation Ceramic Coatings Woof Thermal Management Technology, based in Bradford, West Yorkshire, provides premium specialist coatings and engineering services to industry and end users. The plasma ceramic […]

Coating: Plasma applied ceramics
View in Full ›