Applications

The following pages show a small selection of the many and varied metal spraying applications. You can filter the applications on the left hand side or search for keywords that may relate to your application, e.g. LPG or Steel. Further applications can be seen in the Blog and Press section as well as the Video section.

application Thermal Barrier Coating Onto Exhausts Systems

INTRODUCTION: Thermal Barrier Coating (TBCs) are ceramic materials which are widely used on modern aero engines and land based turbines. They can also be applied to vehicle exhausts, turbocharger casings, heat shields and other vehicle components to reduce heat transfer and improve vehicle performance. Heat soak from hot exhaust systems transfers into other vehicle components […]

View in Full ›
application SciTeeX Installs Grit Blasting and Paint Room Facilities at Fluorocarbon Surface Technologies Ltd

Metallisation’s collaboration with SciTeeX S.p. z.o.o. has yet again resulted in a hugely successful project installation. Metallisation and SciTeeX have been working together for over twelve years and have recently completed a major spray and blasting room project for Fluorocarbon Surface Technologies Ltd. The SciTeeX Group The SciTeeX Group has been active in the surface […]

View in Full ›
application Metallisation Arcbeam spray concentrator.

Metallisation equipment is used around the globe on a daily basis to protect various structures and substrates from corrosion. One recent project saw the Metallisation Arcbeam spray concentrator used successfully at a Middle Eastern oil refinery. Metallisation’s customer, Anti Corrosion Protective Systems (APS), based in Dubai, has been using Metallisation Arcspray equipment for over twenty […]

View in Full ›
application Metallisation and SciTeeX Deliver Successful Turnkey HVOF Project

Metallisation and SciTeeX Deliver Successful Turnkey HVOF Project Metallisation Ltd and SciTeeX S.p. z.o.o., have recently completed a major HVOF turnkey project with B&B Coatings. Metallisation has been providing thermal spray solutions around the globe for over 90 years. SciTeeX Group, has been active in the surface treatment industry since 1992 and today is an […]

Coating: HVOF Thermal spray coatings, WC, Stellite, Inconel
View in Full ›
application HVOF Engineering Applications

High Velocity Oxygen Fuel (HVOF) coatings HVOF is a high energy thermal spray process which produces dense, strong coatings of cermets and metals which give excellent performance in demanding, aggressive, wear and corrosive environments. HVOF coatings are an important part of advanced surface engineering which enable us to salvage and improve components. This enables machinery […]

Coating: High Velocity Oxygen Fuelled spray coatings.
View in Full ›
application Laser Cladding for Critical Component Repair – Duplex Stainless Steel

Introduction     Laser cladding, a process that falls into the range of hard-facing solutions, can be used to increase corrosion resistance, wear resistance or impact performance of metallic components, using a method of applying a fully dense, metallurgically bonded and virtually pure coating.   Laser cladding can be used across a diverse range of […]

Coating: Dense, metallurgically bonded and virtually pure coating.
View in Full ›
application Metallisation Launches New HVOF System

This is the latest development in its range of liquid or gas fuelled High Velocity Oxygen Fuel (HVOF) systems. The new Met-PCC HVOF system retains all of the simple control and operator interface features of the previous HVOF system and is available in two versions: The Met-PCC HVOF-L (liquid fuel), and the Met-PCC HVOF-G (gas […]

Coating: HVOF
View in Full ›
application Laser Cladding for Continuous Caster Rolls

Laser Cladding for Continuous Caster Rolls   Continuous caster rolls are used in the steel industry to cast continuous solid forms from liquid steel. The rolls are exposed to thermal fatigue, high temperatures, bending stresses, corrosion oxidation and abrasion. The standard method of protecting caster rolls is by submerged arc welding with a 400 series […]

View in Full ›
Metallisation Launches New Laser Cladding System
application Metallisation Launches New Laser Cladding System

Metallisation has launched a new laser cladding system, MET-CLAD, which has further enhanced Metallisation’s diverse range of surface coating equipment. Laser cladding, a process that falls into the range of hard- facing solutions, can be used to increase corrosion resistance, wear resistance or impact performance of metallic components, using a method of applying a fully […]

Coating: The laser cladding process utilises a precisely focused high power laser beam to create a tightly controlled weld pool into which a metallic powder is applied.
View in Full ›
application Introduction to Thermal Spray and Engineering Applications

What is Thermal Spraying?   Thermal spraying is a technology which improves or restores the surface of a solid material. The process can be used to apply coatings to a wide range of materials and components, to provide resistance to: Wear, erosion, cavitation, corrosion, abrasion or heat. Thermal spraying is also used to provide electrical […]

Coating: Various steel and ceramic coating materials
View in Full ›