Applications

The following pages show a small selection of the many and varied metal spraying applications. You can filter the applications on the left hand side or search for keywords that may relate to your application, e.g. LPG or Steel. Further applications can be seen in the Blog and Press section as well as the Video section.

application HVOF Engineering Applications

High Velocity Oxygen Fuel (HVOF) coatings HVOF is a high energy thermal spray process which produces dense, strong coatings of cermets and metals which give excellent performance in demanding, aggressive, wear and corrosive environments. HVOF coatings are an important part of advanced surface engineering which enable us to salvage and improve components. This enables machinery […]

Coating: High Velocity Oxygen Fuelled spray coatings.
View in Full ›
application Laser Cladding for Critical Component Repair – Duplex Stainless Steel

Introduction     Laser cladding, a process that falls into the range of hard-facing solutions, can be used to increase corrosion resistance, wear resistance or impact performance of metallic components, using a method of applying a fully dense, metallurgically bonded and virtually pure coating.   Laser cladding can be used across a diverse range of […]

Coating: Dense, metallurgically bonded and virtually pure coating.
View in Full ›
application Laser Cladding for Continuous Caster Rolls

Laser Cladding for Continuous Caster Rolls   Continuous caster rolls are used in the steel industry to cast continuous solid forms from liquid steel. The rolls are exposed to thermal fatigue, high temperatures, bending stresses, corrosion oxidation and abrasion. The standard method of protecting caster rolls is by submerged arc welding with a 400 series […]

View in Full ›
Metallisation Launches New Laser Cladding System
application Metallisation Launches New Laser Cladding System

Metallisation has launched a new laser cladding system, MET-CLAD, which has further enhanced Metallisation’s diverse range of surface coating equipment. Laser cladding, a process that falls into the range of hard- facing solutions, can be used to increase corrosion resistance, wear resistance or impact performance of metallic components, using a method of applying a fully […]

Coating: The laser cladding process utilises a precisely focused high power laser beam to create a tightly controlled weld pool into which a metallic powder is applied.
View in Full ›
application Protecting Ships and Trawlers from Corrosion

Metal or thermal spraying is a technology, which protects or extends the life of a wide variety of structures in the most hostile environments and in situations where coatings are vital for safety and performance. Thermal spraying is carried out in a wide range of anti- corrosion or engineering markets. Typical applications include the spraying […]

Coating: Thermal spraying for corrosion protection
View in Full ›
application Introduction to Thermal Spray and Engineering Applications

What is Thermal Spraying?   Thermal spraying is a technology which improves or restores the surface of a solid material. The process can be used to apply coatings to a wide range of materials and components, to provide resistance to: Wear, erosion, cavitation, corrosion, abrasion or heat. Thermal spraying is also used to provide electrical […]

Coating: Various steel and ceramic coating materials
View in Full ›
application Metallisation Has Launched a New Durable Non-slip Coating

Metallisation Ltd has launched a new durable non-slip coating. 28E ARCTEC coating is ideal for use on steel floors, decks and panels across diverse industries, from train steps to oil platforms. Protection Steel Floors, Decks and Panels Untreated these steel surfaces can become very slippery, especially in wet conditions, and are prone to corrosion. To […]

Coating: 28E Arctec non-slip coating
View in Full ›
application An introduction to metal spray for corrosion protection

Metal or thermal spraying is a technology, which protects and greatly extends the life of a wide variety of products in the most hostile environments and in situations where coatings are vital for longevity. The variety of metallised coatings is vast but can be broken down into two main categories. These include finishing coatings, such […]

Coating: Various corrosion resitant coatings - mainly zinc, aluminium or their alloys
View in Full ›
application Metallisation Protecting Film Industry Sets

For the first time in its 87 year history, Metallisation equipment has been used to protect film industry sets from damage during filming. The polystyrene props were first cut to shape and then metal sprayed with zinc and steel to strengthen them and make them less prone to dents during movement around the set. Metallisation […]

Coating: Zinc base layer, copper, bronze, steel etc. top coatings
View in Full ›
application Flamespray reclamation of rudder posts

INTRODUCTION    The Shipping Industry, like any other Industry, has its share of wear problems. These are generated by the very harsh conditions of a Marine Environment; ships are sometimes at sea for months at a time with limited regular maintenance to some of the extreme areas. The rudder post which will only have limited […]

Coating: T405/1 Bond + 84E 316 Stainless Steel
View in Full ›