Applications

The following pages show a small selection of the many and varied metal spraying applications. You can filter the applications on the left hand side or search for keywords that may relate to your application, e.g. LPG or Steel. Further applications can be seen in the Blog and Press section as well as the Video section.

application Metallisation Arcbeam spray concentrator.

Metallisation equipment is used around the globe on a daily basis to protect various structures and substrates from corrosion. One recent project saw the Metallisation Arcbeam spray concentrator used successfully at a Middle Eastern oil refinery. Metallisation’s customer, Anti Corrosion Protective Systems (APS), based in Dubai, has been using Metallisation Arcspray equipment for over twenty […]

View in Full ›
application HVOF Engineering Applications

High Velocity Oxygen Fuel (HVOF) coatings HVOF is a high energy thermal spray process which produces dense, strong coatings of cermets and metals which give excellent performance in demanding, aggressive, wear and corrosive environments. HVOF coatings are an important part of advanced surface engineering which enable us to salvage and improve components. This enables machinery […]

Coating: High Velocity Oxygen Fuelled spray coatings.
View in Full ›
application Laser Cladding for Critical Component Repair – Duplex Stainless Steel

Introduction     Laser cladding, a process that falls into the range of hard-facing solutions, can be used to increase corrosion resistance, wear resistance or impact performance of metallic components, using a method of applying a fully dense, metallurgically bonded and virtually pure coating.   Laser cladding can be used across a diverse range of […]

Coating: Dense, metallurgically bonded and virtually pure coating.
View in Full ›
Metallisation Launches New Laser Cladding System
application Metallisation Launches New Laser Cladding System

Metallisation has launched a new laser cladding system, MET-CLAD, which has further enhanced Metallisation’s diverse range of surface coating equipment. Laser cladding, a process that falls into the range of hard- facing solutions, can be used to increase corrosion resistance, wear resistance or impact performance of metallic components, using a method of applying a fully […]

Coating: The laser cladding process utilises a precisely focused high power laser beam to create a tightly controlled weld pool into which a metallic powder is applied.
View in Full ›
application Gemini Expands Metal Spraying Services, using TSA Coatings With Metallisation Equipment

Gemini Corrosion Services Ltd is a world leader in protecting steel structures, pipework and subsea pipelines against corrosion. Gemini, a long term customer of Metallisation, is committed to the Metallisation ARC528E system for the effective and efficient application of protective coatings. Gemini, based in the north east of Scotland, has been providing high quality, cost […]

Coating: Aluminium (TSA)
View in Full ›
application Iris NV Expands Use of TSA Coatings and Metal Spraying for Refinery Vessel

Metallisation customer, Iris NV, based in Belgium, has expanded its use of metal spraying and purchased additional Metallisation equipment to accommodate this expansion. Iris was founded in 1946 as an industrial painting company specialising in the treatment of gas pipes, electrical stations, high tension networks and power pylons. Iris NV The services offered by Iris […]

Coating: Aluminium (TSA)
View in Full ›
application Automatic Aluminium Spraying on Riser Pipes

Metallisation’s Arcspray 528 equipment has proved to be a business success for Gemini Corrosion Services Ltd of Stonehaven, Aberdeenshire. Gemini purchased a turnkey package of pipe manipulation equipment and two Arcspray 528 systems last year and has seen a number of improvements resulting in benefits to the customer and to the environment. Gemini Corrosion Services […]

Coating: Aluminium (TSA)
View in Full ›
application Off Shore Oil Platform Protected by Thermal Sprayed Aluminium (TSA) Coating Solution

Metallisation customer, Gardwell Coatings Limited, based in East Anglia, has applied Thermal Sprayed Aluminium (TSA) to an offshore oil platform to protect the structure from corrosion, using Metallisation MK73 flame spray equipment. Gardwell Coatings Limited   The off shore oil platform has been designed and constructed by SLP Engineering the UKs most experienced EP(I)C company. […]

Coating: Aluminium (TSA)
View in Full ›
application Metallisation Has Launched a New Durable Non-slip Coating

Metallisation Ltd has launched a new durable non-slip coating. 28E ARCTEC coating is ideal for use on steel floors, decks and panels across diverse industries, from train steps to oil platforms. Protection Steel Floors, Decks and Panels Untreated these steel surfaces can become very slippery, especially in wet conditions, and are prone to corrosion. To […]

Coating: 28E Arctec non-slip coating
View in Full ›
application Flogas Brings Corrosion Protection In-house

Flogas UK Ltd, one of the UK’s largest LPG suppliers, has moved the application of its corrosion protection of LPG bottles to its in-house facility at Staveley. Using Metallisation’s Arcspray 528 Systems, which they have recently purchased, they can spray around 4,000 bottles per week.   The facility at Staveley has been updated and, with […]

Coating: Zinc
View in Full ›