Applications
The following pages show a small selection of the many and varied metal spraying applications. You can filter the applications on the left hand side or search for keywords that may relate to your application, e.g. LPG or Steel. Further applications can be seen in the Blog and Press section as well as the Video section.
- General corrosion applications
- Aquatic / Marine / Coastal
- Industrial / Chemical
- Structural / Architectural steelwork
- Tubes and pipes
- Decorative / artistic
- Zinc
- Aluminium
- Non-slip
- General engineering applications
- Reclamation / Repair
- Wear resistant coatings
- Electrical engineering
- Heavy engineering
- Oil and gas
- Architectural / Construction
- Automotive / Transport / Aerospace
- Steel production
- Power generation / Wind Power
- Paper and print
- Other corrosion
- Other engineering
High Velocity Oxygen Fuel (HVOF) coatings HVOF is a high energy thermal spray process which produces dense, strong coatings of cermets and metals which give excellent performance in demanding, aggressive, wear and corrosive environments. HVOF coatings are an important part of advanced surface engineering which enable us to salvage and improve components. This enables machinery […]
Introduction Laser cladding, a process that falls into the range of hard-facing solutions, can be used to increase corrosion resistance, wear resistance or impact performance of metallic components, using a method of applying a fully dense, metallurgically bonded and virtually pure coating. Laser cladding can be used across a diverse range of […]
Metallisation has launched a new laser cladding system, MET-CLAD, which has further enhanced Metallisation’s diverse range of surface coating equipment. Laser cladding, a process that falls into the range of hard- facing solutions, can be used to increase corrosion resistance, wear resistance or impact performance of metallic components, using a method of applying a fully […]
Metallisation’s customer, Mabey Bridge, recently metal sprayed a number of Endurance Windpower X-Series wind towers, using the ARC140/S350-CL system, to protect them from corrosion. Mabey Bridge is a specialist supplier of high quality steel bridges, infrastructures, wind turbine towers and heavy plated structural steel work. Based in Chepstow, Mabey Bridge has extensive experience in the […]
With the ever increasing demand for wind power, alongside the challenge of producing taller and taller wind turbines, Andresen Towers has developed a new type of wind turbine tower. Zinc Metal Coating As with all steel structures which are located outside, corrosion is an issue which needs to be addressed. During the design stage of […]
Metallisation customer, Lainsa, based in Mexico and part of Grupo Dominguis, provides metal spraying for corrosion protection of pipes used to exchange and transport dry water vapour in thermoelectric, conventional and nuclear power plants. Metal Spraying for Corrosion Protection of Pipes The application of metal spraying is critical, as the circulation of dry steam at […]
In the petrochemical industry Corrosion Under Insulation (CUI) in pipeline systems consumes a significant percentage of the maintenance budget. A large portion of this money is spent on expensive items such as external piping inspection, insulation removal and re-installation, painting and pipe replacements. CUI prevention strategies provide long term and reliable prevention of CUI that […]
