Applications

The following pages show a small selection of the many and varied metal spraying applications. You can filter the applications on the left hand side or search for keywords that may relate to your application, e.g. LPG or Steel. Further applications can be seen in the Blog and Press section as well as the Video section.

application HVOF Engineering Applications

High Velocity Oxygen Fuel (HVOF) coatings HVOF is a high energy thermal spray process which produces dense, strong coatings of cermets and metals which give excellent performance in demanding, aggressive, wear and corrosive environments. HVOF coatings are an important part of advanced surface engineering which enable us to salvage and improve components. This enables machinery […]

Coating: High Velocity Oxygen Fuelled spray coatings.
View in Full ›
application Metallisation Launches New HVOF System

This is the latest development in its range of liquid or gas fuelled High Velocity Oxygen Fuel (HVOF) systems. The new Met-PCC HVOF system retains all of the simple control and operator interface features of the previous HVOF system and is available in two versions: The Met-PCC HVOF-L (liquid fuel), and the Met-PCC HVOF-G (gas […]

Coating: HVOF
View in Full ›
Metallisation Launches New Laser Cladding System
application Metallisation Launches New Laser Cladding System

Metallisation has launched a new laser cladding system, MET-CLAD, which has further enhanced Metallisation’s diverse range of surface coating equipment. Laser cladding, a process that falls into the range of hard- facing solutions, can be used to increase corrosion resistance, wear resistance or impact performance of metallic components, using a method of applying a fully […]

Coating: The laser cladding process utilises a precisely focused high power laser beam to create a tightly controlled weld pool into which a metallic powder is applied.
View in Full ›
application Introduction to Thermal Spray and Engineering Applications

What is Thermal Spraying?   Thermal spraying is a technology which improves or restores the surface of a solid material. The process can be used to apply coatings to a wide range of materials and components, to provide resistance to: Wear, erosion, cavitation, corrosion, abrasion or heat. Thermal spraying is also used to provide electrical […]

Coating: Various steel and ceramic coating materials
View in Full ›
application Ten Diverse Applications For Metal Spraying

Thermal spraying, also commonly known as metal spraying, is a coating process where a wide range of metals or ceramics can be sprayed onto the surface of another material. There are untold uses for this – here’s 10 applications for starters… 1. Wind Turbines Atmospheric corrosion causes damage to wind turbines. It’s for this reason […]

Coating: Various
View in Full ›
application An introduction to metal spray for corrosion protection

Metal or thermal spraying is a technology, which protects and greatly extends the life of a wide variety of products in the most hostile environments and in situations where coatings are vital for longevity. The variety of metallised coatings is vast but can be broken down into two main categories. These include finishing coatings, such […]

Coating: Various corrosion resitant coatings - mainly zinc, aluminium or their alloys
View in Full ›
application Metallisation Pistol Control Console (PCC)

Plasma Technology Incorporated (PTI) is so impressed with the Metallisation Pistol Control Console (PCC), the company has purchased seven units and is planning to add a further seven units in 2012. The Metallisation PCC has enabled PTI to enhance the spray capabilities of its HVOF spray systems. Plasma Technology Incorporated Impressed with Metallisation’s PCC The […]

Coating: Tungsten Carbide Cobalt Chrome (WC/Co/Cr)
View in Full ›
Anti-corrosion metal spraying – basic guide
application Anti-corrosion metal spraying – basic guide

Anti Corrosive Metal Finishing Metal or thermal spraying is a technology, which protects and greatly extends the life of a wide variety of products in the most hostile environments and in situations where coatings are vital for longevity. The variety of metallised coatings is vast but can be broken down into two main categories. These […]

Coating: N/A
View in Full ›
application HVOF Alternatives to Hard Chrome Plating

Introduction to HVOF Alternatives to Hard Chrome Plating Chrome plating has been accepted and used for many years to provide hard wearing surfaces, however; American environmental legislation as forced the closure of many, many US plating contractors. To continue legal operations, those US contractors that have wished to remain in business have had to make […]

Coating: 99408 Fe/Cr/Mo, 99325 Ni/Cr/Bi/Si, 99735 Wc/Co17%, 99745 Wc/Co/Cr
View in Full ›
application Protection of Iron and steel at Elevated Temperatures

 INTRODUCTION  Unprotected iron and steel surfaces oxidise and corrode rapidly at elevated temperatures in the presence of industrial atmospheres, hot gases and condensation products. Experience within the Metallisation Group has shown that nickel-chromium alloys and/or aluminium coatings give protection and increase the life expectancy of steelwork up to temperatures as high as 1200°C. Because oxidation rates […]

Coating: 01E Aluminium, 85E Ni/Cr
View in Full ›