Applications

The following pages show a small selection of the many and varied metal spraying applications. You can filter the applications on the left hand side or search for keywords that may relate to your application, e.g. LPG or Steel. Further applications can be seen in the Blog and Press section as well as the Video section.

application HVOF Engineering Applications

High Velocity Oxygen Fuel (HVOF) coatings HVOF is a high energy thermal spray process which produces dense, strong coatings of cermets and metals which give excellent performance in demanding, aggressive, wear and corrosive environments. HVOF coatings are an important part of advanced surface engineering which enable us to salvage and improve components. This enables machinery […]

Coating: High Velocity Oxygen Fuelled spray coatings.
View in Full ›
application Laser Cladding for Critical Component Repair – Duplex Stainless Steel

Introduction     Laser cladding, a process that falls into the range of hard-facing solutions, can be used to increase corrosion resistance, wear resistance or impact performance of metallic components, using a method of applying a fully dense, metallurgically bonded and virtually pure coating.   Laser cladding can be used across a diverse range of […]

Coating: Dense, metallurgically bonded and virtually pure coating.
View in Full ›
application Metallisation Launches New HVOF System

This is the latest development in its range of liquid or gas fuelled High Velocity Oxygen Fuel (HVOF) systems. The new Met-PCC HVOF system retains all of the simple control and operator interface features of the previous HVOF system and is available in two versions: The Met-PCC HVOF-L (liquid fuel), and the Met-PCC HVOF-G (gas […]

Coating: HVOF
View in Full ›
application Laser Cladding for Continuous Caster Rolls

Laser Cladding for Continuous Caster Rolls   Continuous caster rolls are used in the steel industry to cast continuous solid forms from liquid steel. The rolls are exposed to thermal fatigue, high temperatures, bending stresses, corrosion oxidation and abrasion. The standard method of protecting caster rolls is by submerged arc welding with a 400 series […]

View in Full ›
Metallisation Launches New Laser Cladding System
application Metallisation Launches New Laser Cladding System

Metallisation has launched a new laser cladding system, MET-CLAD, which has further enhanced Metallisation’s diverse range of surface coating equipment. Laser cladding, a process that falls into the range of hard- facing solutions, can be used to increase corrosion resistance, wear resistance or impact performance of metallic components, using a method of applying a fully […]

Coating: The laser cladding process utilises a precisely focused high power laser beam to create a tightly controlled weld pool into which a metallic powder is applied.
View in Full ›
application Introduction to Thermal Spray and Engineering Applications

What is Thermal Spraying?   Thermal spraying is a technology which improves or restores the surface of a solid material. The process can be used to apply coatings to a wide range of materials and components, to provide resistance to: Wear, erosion, cavitation, corrosion, abrasion or heat. Thermal spraying is also used to provide electrical […]

Coating: Various steel and ceramic coating materials
View in Full ›
application Thermal Spraying Equipment Providing Engineering Coatings

Thermal Spraying Equipment Providing Engineering Coatings   Thermal sprayed coatings have been a recognised and trusted solution for engineering coatings in the aerospace industry for many years. Metallisation has been providing thermal spraying advice, training, support, equipment and consumables to a diverse range of industries around the world, including the aerospace industry, since 1922. Stringent […]

Coating: Various engineering coatings (steels, ceramics)
View in Full ›
application Metallisation Pistol Control Console (PCC)

Plasma Technology Incorporated (PTI) is so impressed with the Metallisation Pistol Control Console (PCC), the company has purchased seven units and is planning to add a further seven units in 2012. The Metallisation PCC has enabled PTI to enhance the spray capabilities of its HVOF spray systems. Plasma Technology Incorporated Impressed with Metallisation’s PCC The […]

Coating: Tungsten Carbide Cobalt Chrome (WC/Co/Cr)
View in Full ›
Aerospace engine repair functions
application Aerospace engine repair functions

Thermal Spraying Equipment Providing Engineering Coatings   Thermal sprayed coatings have been a recognised and trusted solution for engineering coatings in the aerospace industry for many years. Metallisation has been providing thermal spraying advice, training, support, equipment and consumables to a diverse range of industries around the world, including the aerospace industry, since 1922. Stringent […]

Coating: Various arc, plasma and powder flame coatings including Ni/Al bond, NiGr and CrC
View in Full ›
application Arcspray reclamation of ball bearing seats on rubber coated print rollers

INTRODUCTION  The printing paper and packaging industries use a wide range of rubber coated steel rollers for applying ink, adhesive or the transportation of paper. During use the bearings at each end of the rubber coated rollers will become impregnated with ink adhesive or other types of debris causing them to seize, inducing the roller […]

Coating: 79E Ichrome
View in Full ›