Applications

The following pages show a small selection of the many and varied metal spraying applications. You can filter the applications on the left hand side or search for keywords that may relate to your application, e.g. LPG or Steel. Further applications can be seen in the Blog and Press section as well as the Video section.

application Metallisation Equipment Protecting Fishing Boats

Metallisation’s thermal spraying equipment has been protecting a diverse range of surfaces, structures and vessels for over ninety years and continues to be the chosen solution for many industry sectors. A recent project has yet again proven the longevity of thermal sprayed surfaces. Parkol Marine Engineering, based in Whitby, has recently applied a thermal sprayed […]

Coating: Arc sprayed zinc
View in Full ›
application Metallisation Arcbeam spray concentrator.

Metallisation equipment is used around the globe on a daily basis to protect various structures and substrates from corrosion. One recent project saw the Metallisation Arcbeam spray concentrator used successfully at a Middle Eastern oil refinery. Metallisation’s customer, Anti Corrosion Protective Systems (APS), based in Dubai, has been using Metallisation Arcspray equipment for over twenty […]

View in Full ›
application HVOF Engineering Applications

High Velocity Oxygen Fuel (HVOF) coatings HVOF is a high energy thermal spray process which produces dense, strong coatings of cermets and metals which give excellent performance in demanding, aggressive, wear and corrosive environments. HVOF coatings are an important part of advanced surface engineering which enable us to salvage and improve components. This enables machinery […]

Coating: High Velocity Oxygen Fuelled spray coatings.
View in Full ›
application Laser Cladding for Critical Component Repair – Duplex Stainless Steel

Introduction     Laser cladding, a process that falls into the range of hard-facing solutions, can be used to increase corrosion resistance, wear resistance or impact performance of metallic components, using a method of applying a fully dense, metallurgically bonded and virtually pure coating.   Laser cladding can be used across a diverse range of […]

Coating: Dense, metallurgically bonded and virtually pure coating.
View in Full ›
Metallisation Launches New Laser Cladding System
application Metallisation Launches New Laser Cladding System

Metallisation has launched a new laser cladding system, MET-CLAD, which has further enhanced Metallisation’s diverse range of surface coating equipment. Laser cladding, a process that falls into the range of hard- facing solutions, can be used to increase corrosion resistance, wear resistance or impact performance of metallic components, using a method of applying a fully […]

Coating: The laser cladding process utilises a precisely focused high power laser beam to create a tightly controlled weld pool into which a metallic powder is applied.
View in Full ›
application Mabey Bridge Wind Turbine Towers and Arcspray System ARC140

Metallisation’s customer, Mabey Bridge, recently metal sprayed a number of Endurance Windpower X-Series wind towers, using the ARC140/S350-CL system, to protect them from corrosion. Mabey Bridge is a specialist supplier of high quality steel bridges, infrastructures, wind turbine towers and heavy plated structural steel work. Based in Chepstow, Mabey Bridge has extensive experience in the […]

Coating: Arc Spray applied for anti corrosion
View in Full ›
application Zinc Coating Protects the Next Generation of Wind Turbine Towers

With the ever increasing demand for wind power, alongside the challenge of producing taller and taller wind turbines, Andresen Towers has developed a new type of wind turbine tower. Zinc Metal Coating As with all steel structures which are located outside, corrosion is an issue which needs to be addressed. During the design stage of […]

Coating: Thermal Sprayed Zinc
View in Full ›
application Protecting Ships and Trawlers from Corrosion

Metal or thermal spraying is a technology, which protects or extends the life of a wide variety of structures in the most hostile environments and in situations where coatings are vital for safety and performance. Thermal spraying is carried out in a wide range of anti- corrosion or engineering markets. Typical applications include the spraying […]

Coating: Thermal spraying for corrosion protection
View in Full ›
application RJ Herbert Opts for Metal Spraying with Metallisation

RJ Herbert Engineering has opted for metal spraying, using Metallisation equipment, as an alternative to hot dip galvanising, to improve customer service, reduce costs and save time. RJ Herbert Engineering The decision to opt for metal spraying was made following a request from a Belgian customer, a potato processing and packaging line export company, to […]

Coating: Zinc
View in Full ›
application Iris NV Expands Use of TSA Coatings and Metal Spraying for Refinery Vessel

Metallisation customer, Iris NV, based in Belgium, has expanded its use of metal spraying and purchased additional Metallisation equipment to accommodate this expansion. Iris was founded in 1946 as an industrial painting company specialising in the treatment of gas pipes, electrical stations, high tension networks and power pylons. Iris NV The services offered by Iris […]

Coating: Aluminium (TSA)
View in Full ›