Applications

The following pages show a small selection of the many and varied metal spraying applications. You can filter the applications on the left hand side or search for keywords that may relate to your application, e.g. LPG or Steel. Further applications can be seen in the Blog and Press section as well as the Video section.

application The arcspray reclamation of hydraulic rams

Introduction The hydraulic Industry, like any other Industry, has its share of wear problems. These are generated by the very harsh operational conditions. The 103T arcspray coating offers the advantages of low friction and great wear resistance, with the added benefit of being able to repair deeply scored rams with one process. By using the […]

Coating: Arcspray 79E (Ichrome) Bond 103T (Fe/Cr/B) main deposit
View in Full ›
application Arcspraying of mill rolls

INTRODUCTION      In the past, tremendous problems have been associated with billet ‘biting’ on newly machined mill rolls. The rolls have a very smooth finish after being machined and therefore offer less surface friction on the billet to pull it through the mill stand. This problem occurs mainly where a large bite angle occurs […]

Coating: Arcspray 75E (Ni/Al)
View in Full ›
application Flamespraying of mill rolls

INTRODUCTION     In the past, tremendous problems have been associated with billet ‘biting’ on newly machined mill rolls. The rolls have a very smooth finish after being machined and therefore offer less surface friction on the billet to pull it through the mill stand. This problem occurs mainly where a large bite angle occurs […]

Coating: Flamespray T405/1 (Ni/Al)
View in Full ›
application The reclamation of crankshafts by the powder flamespray process

Introduction The reclamation of crankshafts (and many other components) by powder flamespraying can produce considerable savings over the replacement cost. 50% savings are common and on large components, as much as 90% may be saved. The need for reclamation may be to correct manufacturing errors, to repair an obsolete part or a part that has […]

Coating: Powderspray 99636 (Ni/Al) bond + 99627 (Ni/Al/Mo) main deposit
View in Full ›
application The reclamation of crankshafts by Plasmaspray

Introduction The reclamation of crankshafts (and many other components) by plasma spraying can produce considerable savings over the replacement cost. 50% savings are common and on large components, as much as 90% may be saved. The need for reclamation may be to correct manufacturing errors, to repair an obsolete part or a part that has […]

Coating: Plasma 99636 (Ni/Al) bond + 99627 (Ni/Al/Mo) main deposit
View in Full ›
application The reclamation of crankshafts by Flamespray

  Introduction The reclamation of crankshafts (and many other components) by flamespraying can produce considerable savings over the replacement cost. 50% savings are common and on large components, as much as 90% may be saved. The need for reclamation may be to correct manufacturing errors, to repair an obsolete part or a part that has […]

Coating: Flamespray T405/1 (Ni/Al) bond + 60E (13% Chrome steel) main deposit
View in Full ›
application The Reclamation Of Crankshafts By Arcspraying

The reclamation of crankshafts (and many other components) by electric arcspraying can produce considerable savings over replacement costs. 50% savings are common, and on large components, as much as 90% may be saved. The need for reclamation may be to correct manufacturing errors, to repair an obsolete part or a part that has worn excessively […]

Coating: Arcspray 75E (Ni/Al) Bond + 60E (13% Chrome steel) main deposit
View in Full ›