Applications

The following pages show a small selection of the many and varied metal spraying applications. You can filter the applications on the left hand side or search for keywords that may relate to your application, e.g. LPG or Steel. Further applications can be seen in the Blog and Press section as well as the Video section.

application Flamespray reclamation of ships propeller shafts

INTRODUCTION  Due to the constant rotation of a ships propeller shaft in a harsh marine environment, the bearing areas are very susceptible to wear, consequently giving rise to the inclusion of sand, salt water and other debris, leading to bearing seizure and loss of propulsion. By using the Metallisation Flamespray process it is possible to […]

Coating: T405/1 Bond + 84E 316 Stainless Steel Main deposit
View in Full ›
application Arcspray reclamation of ships propeller shafts

INTRODUCTION  Due to the constant rotation of a ships propeller shaft in a harsh marine environment, the bearing areas are very susceptible to wear, consequently giving rise to the inclusion of sand, salt water and other debris, leading to bearing seizure and loss of propulsion. By using the Metallisation Arcspray process it is possible to […]

Coating: 75E Ni/Al Bond + 84E 316 Stainless Steel main deposit
View in Full ›
application Arcspray reclamation of rudder posts

INTRODUCTION    The Shipping Industry, like any other Industry, has its share of wear problems. These are generated by the very harsh conditions of a Marine Environment; ships are sometimes at sea for months at a time with limited regular maintenance to some of the extreme areas. The rudder post which will only have limited […]

Coating: 75E Ni/Al Bond + 84E 316 Stainless Steel main deposit
View in Full ›
application Plasma reinforced coating system for cookware

Introduction to Plasma Sprayed Ceramic Coating The application of Plasma sprayed ceramic 99216 as a reinforced coating has been proven to increases the working life of many types of cookware. Even above that achieved by Arcsprayed Stainless Steel (LE-WR-002). By producing a thin Plasma sprayed layer the fluoropolymer coating penetrates the sprayed surface. This produces […]

Coating: 99216 AlO2 / TiO2 Ceramic Powder
View in Full ›
application Arcsprayed reinforced coating system for cookware

Introduction to Arcpsrayed Stainless Steel and Ceramic Coatings in Cookware The application of Arcsprayed Stainless Steel as a reinforced coating has been proven to drastically increase the working life of many types of cookware. By producing a thin Arcsprayed layer the fluoropolymer coating penetrates the sprayed surface. This produces high bond strengths and allows the […]

Coating: 81E 312 Stainless Steel
View in Full ›
application HVOF Alternatives to Hard Chrome Plating

Introduction to HVOF Alternatives to Hard Chrome Plating Chrome plating has been accepted and used for many years to provide hard wearing surfaces, however; American environmental legislation as forced the closure of many, many US plating contractors. To continue legal operations, those US contractors that have wished to remain in business have had to make […]

Coating: 99408 Fe/Cr/Mo, 99325 Ni/Cr/Bi/Si, 99735 Wc/Co17%, 99745 Wc/Co/Cr
View in Full ›
application Flamesprayed Anti-Spark Coating on Crane Hooks

INTRODUCTION      In the Oil, Gas and Petro-Chemical Industries or the storage of munitions, there is always a very high risk of fire or explosion due to spark hazard. The sparks often being caused by friction between two steel components. By using the Metallisation Flamespray Process, it is possible to remove this major source […]

Coating: 15E Phosphor Bronze
View in Full ›
application Arcsprayed Anti-spark Coating on Crane Hooks

INTRODUCTION    In the Oil, Gas and Petro-Chemical Industries or the storage of munitions, there is always a very high risk of fire or explosion due to spark hazard. The sparks often being caused by friction between two steel components. By using the Metallisation Arcspray Process, it is possible to remove this major source of […]

Coating: 15E Phosphor Bronze
View in Full ›
application The Aluminium Spraying of Stud Welded Fasteners

INTRODUCTION  To assist with attachment and produce a stronger weld, aluminium is being used as a fluxing agent on welding fasteners. There are generally two methods of applying the aluminium to the fastener end. In some cases a small hole will be drilled in the centre of the fastener end then an aluminium ball of […]

Coating: 01E Aluminium
View in Full ›
application Spinning Machine Trough Ceramic Coating

  Introduction to Machine Through Ceramic Coating For many years with in the Ductile Iron pipe industry problems of short life expectancy of the troughs and fall chutes has been experienced on the Centrifugal Casting Machines (Spinning Machine), typically one trough per week. This has contributed to high yearly costs due to downtime, trough replacement […]

Coating: Multi layer 99627 Ni/Al/Moly + 99910 Cermet + 99205 Grey alumina + 01E Aluminium Wire
View in Full ›