Videos

The following pages show a number of videos that show the process and some typical applications.
You can apply filters on the left hand side of the page or search for terms that may relate to your application.

23 Result(s) found
Metallisation Product Overview
Metallisation Product Overview
A general overview of the Metallisation process and product range covering flamespray, arcspray, plasma spray and HVOF systems plus turnkey automation.
View in Full ›
HVOF Turnkey Installation at B&B Coatings Ltd
HVOF Turnkey Installation at B&B Coatings Ltd
HVOF turnkey blast and spray facility
This video gives an overview of a turnkey blast and HVOF thermal spray installation, installed at B&B Coatings Ltd in Yorkshire, UK.
The project was the result of a co-operation between SciTeeX in Poland and Metallisation Ltd to supply a blast room, HVOF spray room, extraction, robot and MET-PCC(HVOF-L) liquid fuel HVOF system.
View in Full ›
Met-Clad Laser Cladding
Met-Clad Laser Cladding
An introduction to the laser cladding process and the Metallisation MET-CLAD laser cladding system
View in Full ›
Arcspray process
Arcspray process

Introduction to the Metallisation arcspray process, including typical arcspray applications and the benefits of our arcspray solutions.

View in Full ›
Flamespray process
Flamespray process
Introduction to the flamespray process
View in Full ›
Parkol Marine spray zinc onto fishing boat with ARC150
Parkol Marine spray zinc onto fishing boat with ARC150
Parkol Marine Engineering, based in Whitby, has recently applied a thermal sprayed zinc coating using a Metallisation ARC150 arc spray system to a new whitefish trawler, the Resilient LK195, to protect it from corrosion.
View in Full ›
TSA (Thermal Spray Aluminium) for CUI
TSA (Thermal Spray Aluminium) for CUI
TSA is applied by the flame spray process using a Metallisation MK73 system with long supplies package to assist in accessing hard to reach areas.
View in Full ›
Sciteex blast and paint rooms at Fluorocarbon
Sciteex blast and paint rooms at Fluorocarbon
Installation of a 4m x 4m x 4m SciTeeX Cabilux blast booth and 7m x 5m x 5m SciTeeX Venus paint booth.
View in Full ›
Application of thermal spray zinc to wind towers
Application of thermal spray zinc to wind towers
Thermal spray zinc is manually applied to wind towers by a Metallisation ARC140/S350-CL twin wire arc spray system.
View in Full ›
Auto application of thermal spray zinc to wind towers
Auto application of thermal spray zinc to wind towers
Thermal spray zinc is applied to a new design of wind tower.  The zinc is applied automatically by robot mounted twin wire arc spray systems to bolted joint faces for corrosion protection and increased joint friction.
View in Full ›